Hi-Tec HS 225MG
Metal Gear servo Good for Throttle in the 67/101 and Gas boats. Also used for Steering in the 20 Mono.
| Dimensions | 1.27" x 0.66" x 1.22" (32.26 x 16.76 x 31.00mm) |
|---|---|
| Product Weight | 1.10oz (31g) |
| Output Shaft Style | 24 tooth (C1) spline |
| Voltage Range | 4.8V - 6.0V |
| No-Load Speed (4.8V) | 0.14sec/60° |
| No-Load Speed (6.0V) | 0.11sec/60° |
| Stall Torque (4.8V) | 54.15 oz/in. (3.9kg.cm) |
| Stall Torque (6.0V) | 66.65 oz/in. (4.8kg.cm) |
| Max PWM Signal Range (Standard) | 553-2520μsec |
| Travel per µs (out of box) | .097°/μsec |
| Max Travel (out of box) | 191° |
| Pulse Amplitude | 3-5V |
| Operating Temperature | -20°C to +60°C |
| Current Drain - idle (4.8V) | 8mA |
| Current Drain - idle (6.0V) | 8.8mA |
| Current Drain - no-load (4.8V) | 300mA |
| Current Drain - no-load (6V) | 340mA |
| Continuous Rotation Modifiable | Yes |
| Direction w/ Increasing PWM Signal | Clockwise |
| Deadband Width | 8µs |
| Motor Type | 3 Pole Ferrite |
| Potentiometer Drive | Indirect Drive |
| Internal Feedback Style | 5KΩ Potentiometer |
| Output Shaft Support | 1 Ball Bearing and 1 Oilite Bushing |
| Gear Type | Straight Cut Spur |
| Gear Material | 4 Metal and 1 Nylon |
| Wire Length | 11.81" (300mm) |
| Wire Gauge | 25AWG |