Hi-Tec - D 645 MW
The metal gear D-645MW is part of Hitec’s D-Series dynamo servo line. All Hitec D-Series servos have been designed using their cutting edge, custom engineering. Combining industry leading high-resolution, state-of-the-art ultra-response technology with a 32-bit MCU, and a 12-bit ADC for unprecedented programmability and flexibility. These servos deliver significantly smoother movement. The speedy, powerful line operates on a wide 4.8 ~ 8.4 voltage range, allowing use with any common battery chemistry without the need for adapters or regulators. Featuring Hitec’s industry standard 25-tooth output spline with an M3 pan head with a phillips drive style, each D-Series servo brings monster performance never known before in the market.
Dimensions | 1.59” x 0.77” x 1.48” (40.6 x 19.8 x 37.8mm) |
---|---|
Product Weight | 2.11oz (60g) |
Output Shaft Style | 25 tooth (H25T) spline |
Voltage Range | 4.8V - 8.4V |
No-Load Speed (4.8V) | 0.28 sec/60° |
No-Load Speed (6.0V) | 0.20 sec/60° |
No-Load Speed (7.4V) | 0.17 sec/60° |
Stall Torque (4.8V) | 115.3 oz/in. (8.3 kg.cm) |
Stall Torque (6.0V) | 157.8 oz/in. (11.3 kg.cm) |
Stall Torque (7.4V) | 180.1 oz/in. (12.9 kg.cm) |
Max PWM Signal Range (Standard) | 750-2250μsec |
Travel per µs (out of box) | .080°/μsec |
Max Travel (out of box) | 120° |
Pulse Amplitude | 3-5V |
Operating Temperature | -20°C to +60°C |
Continuous Rotation Modifiable | Yes |
Direction w/ Increasing PWM Signal | Clockwise |
Deadband Width | 2µs |
Motor Type | 3 Pole Ferrite |
Internal Feedback Style | 5KΩ Potentiometer |
Output Shaft Support | Dual Ball Bearings |
Gear Type | Straight Cut Spur |
Gear Material | Metal |
Wire Length | 11.81" (300mm) |