Hi-Tec HS 755 MG
Hitec’s expansive line-up of servos include the HS-755HB and HS-755MG “giant scale” servos offered with either the revolutionary Karbonite™ gears or metal gears. Both are perfect for larger R/C applications and feature dual ball bearings with a water and dust resistant case. The powerful HS-755MG delivers a whopping 200 oz./in. of torque and the HS-755HB delivers 183 oz./in. of torque at 6 volts.
| Dimensions | 2.3" x 1.1"x 2.0" (59 x 29 x 50mm) |
|---|---|
| Product Weight | 4.12 oz.. (117g) |
| Output Shaft Style | 24 tooth (C1) spline |
| Voltage Range | 4.8V - 6.0V |
| No-Load Speed (4.8V) | 0.28sec/60° |
| No-Load Speed (6.0V) | 0.23sec/60° |
| Stall Torque (4.8V) | 167 oz/in. (12kg.cm) |
| Stall Torque (6.0V) | 200 oz/in. (14kg.cm) |
| Max PWM Signal Range (Standard) | 570-2400μsec |
| Travel per µs (out of box) | .110°/μsec |
| Max Travel (out of box) | 200.5° |
| Pulse Amplitude | 3-5V |
| Operating Temperature | -20°C to +60°C |
| Current Drain - idle (4.8V) | 8mA |
| Current Drain - idle (6.0V) | 8.7mA |
| Current Drain - no-load (4.8V) | 230mA |
| Current Drain - no-load (6V) | 285mA |
| Continuous Rotation Modifiable | Yes |
| Direction w/ Increasing PWM Signal | Clockwise |
| Deadband Width | 8µs |
| Motor Type | 3 Pole Ferrite |
| Potentiometer Drive | Indirect Drive |
| Internal Feedback Style | 5KΩ Potentiometer |
| Output Shaft Support | 1 Bearing and 1 Oilite Bushing |
| Gear Type | Straight Cut Spur |
| Gear Material | Metal |
| Wire Length | 11.81" (300mm) |
| Wire Gauge | 22AWG |